Warrior Wireless Surface Data Acquisition System

Wireless Surface Data Acquisition System (WSDAS)

Wireless Surface Data Acquistion (WSDAS). WSDAS is a real time Wireless Surface Data Acquisition System. WSDAS can be used with downhole electronic instruments to provide downhole and surface sensor data monitoring.WSDAS wireless I/O network can operate in extreme environments while eliminating the need for costly and time consuming wire runs.

Specifiactions:
Range: 2.4 GHz: Up to 3.2 kilometers (2 miles)*
Transmit Power: 2.4 GHz: 18 dBm conducted, less than or equal to 20 dBm EIRP
2.4 GHz Compliance: FCC ID UE300DX80-2400 - This device complies with FCC Part 15, Subpart C, 15.247 ETSI/EN: In accordance with EN 300 328: V1.7.1 (2006-05) IC: 7044A-DX8024
Spread Spectrum Technology: FHSS (Frequency Hopping Spread Spectrum
Modbus/TCP and EtherNet/IP: 4-wire Industrial Ethernet 10/100 Mbps, full or half duplex, auto sensing
Environmental Rating: IEC IP67; NEMA 6
Operating Temperature: −40 to +85° C (Electronics); −20 to +80° C (LCD)
Operating Humidity: 95% max. relative (non-condensing)
Radiated Immunity: 10 V/m, 80-2700 MHz (EN61000-6-2)
Shock and Vibration

Specifiactions:

Range: 2.4 GHz: Up to 3.2 kilometers (2 miles)*

Transmit Power: 2.4 GHz: 18 dBm conducted, less than or equal to 20 dBm EIRP

2.4 GHz Compliance:
FCC ID UE300DX80-2400 - This device complies with FCC Part 15, Subpart C, 15.247
ETSI/EN: In accordance with EN 300 328: V1.7.1 (2006-05) IC: 7044A-DX8024

Spread Spectrum Technology: FHSS (Frequency Hopping Spread Spectrum

Modbus/TCP and EtherNet/IP: 4-wire Industrial Ethernet 10/100 Mbps, full or half duplex, auto sensing

Environmental Rating: IEC IP67; NEMA 6

Operating Temperature: −40 to +85° C (Electronics); −20 to +80° C (LCD)

Operating Humidity: 95% max. relative (non-condensing)

Radiated Immunity: 10 V/m, 80-2700 MHz (EN61000-6-2)

Shock and Vibration

* With the standard 2 dB antenna. High-gain antennas are available, but the range depends on the environment and line of sight. To determine the range of your wireless network, perform a Site Survey.